Magnus Energy Services (MES)
Products

Flow measurement Instruments

Canalta Controls is leading the natural gas industry in the manufacturing of control and measurement equipment. We manufacture and service high-quality flow measurement equipment that is changing the oil and gas sector.
Visit Website

Orifice Fitting

Pressure & DP Transmitter

This brings the unmatched safety of double block and bleed functionality to the already exceptional quality and performance of the Canalta lineup of orifice fittings.

  • Protection from high pressure and toxic flow media
  • Accurate flow measurement
  • Highest quality manufacturing
  • Available as fitting-only, retrofit, or complete AGA-3 / ISO-5167 meter solutions

Dual Chamber Orifice Fitting

Temperature Transmitter

The Canalta Dual Chamber Orifice Fitting allows for accurate flow measurements, orifice plate inspection and changing without breaking apart or depressurizing the flow line.

  • Standard documentation package includes hydro-test, function test, inner valve seal test, quality control inspection, and material test reports.
  • Complete product traceability maintained in accordance with the ISO 9001 Quality Control Program.
  • Manufactured in compliance with ASME 16.34 and ASME 16.5 standards.
  • Optional radiography, stress relief, ultrasonic, magnetic particle, and liquid dye penetration tests available with relevant test reports.

Single Chamber Orifice Fitting

Single-Chamber-Orifice-Fitting

The Canalta Single Chamber Orifice Fitting is designed and constructed to allow for ease of orifice plate replacement or inspection after depressurization.

  • Standard documentation package includes hydro-test, function test, inner valve seal test, quality control inspection, and material test reports.
  • Traceability maintained in accordance with the ISO 9001 Quality Control Program.
  • Manufactured in compliance with ASME 16.34 and ASME 16.5 standards.
  • Optional radiography, stress relief, ultrasonic, magnetic particle, and liquid dye penetrant tests available with relevant reports.

Contour Flow Conditioner Housings

Contour-Flow-Conditioner-Housings

The Canalta Contour FCH™ Flow Conditioner Housing brings the ease, safety and practicality of inspecting and changing an orifice plate to the flow conditioner.

This long overdue concept allows for regular inspections of the flow conditioner without breaking apart the flow line. The Canalta Contour FCH™ allows the operator to easily perform flow conditioner inspection and maintenance on the same regular schedule as the orifice plate. With this innovative, newly patented design, you can be sure that your flow profile has not been degraded by damage, blockage or residue accumulation.

  • Standard documentation package includes hydro-test, function test, inner valve seal test, quality control inspection, and material test reports.
  • Traceability maintained in accordance with the ISO 9001 Quality Control Program.
  • Manufactured in compliance with ASME 16.34 and ASME 16.5 standards.
  • Optional radiography, stress relief, ultrasonic, magnetic particle, and liquid dye penetrant tests available with relevant reports.

CoFlo Fitting

CoFlo-Fitting

Our new CoFLo design is a new way of looking at simplistic accurate DP measurement. It offers the same accurate and repeatable measurement qualities that you have come to expect in a standard single-chamber orifice fitting but with the following advantages.

  • Provides protection against over-torquing.
  • Features reliable O-ring sealing.
  • Compact design for installation in confined spaces.
  • Available as a fitting-only solution, retrofit, or complete AGA-3 / ISO-5167 meter.
  • Supports flange pressure ratings from ANSI 150 to 900.
  • Eliminates the upstream flange gap.

Custom Meter Runs

Custom-Meter-Runs

Canalta fabricates custom meter runs for all of our orifice fitting models and a variety of other metering applications. Whether the size is 2” or 30”, high or low pressure, wet, dry or corrosive service, we can put together a custom meter run package that meets your specification or performance needs and perfectly matches your Canalta Orifice Fitting or other specialized metering device.

Our skilled technicians, engineers, and inspectors work together to design and manufacture first-rate meter tubes out of pipe carefully selected and prepared with the appropriate surface requirements, roundness, and I.D. tolerances.

Hydrostatic test results are included as a standard. PWHT stress relief, x-ray, ultrasonic, magnetic particle, and liquid dye penetration test results are available on request. Our rigorous inspection regime and comprehensive documentation ensure meter run reliability, accuracy, and safety for service. All meter runs meet AGA-3 / API 14.3 and ISO 5167-1 specification.

CK5 and Z Flow Conditioners

ck-5-z-flow-conditoner

Contour™ CK5 and Z Flow Conditioners maximize orifice meter accuracy while significantly reducing upstream pipe length requirements. This common design fully develops the flow profile and helps to eliminate flow disturbances without creating a significant pressure drop.

Accurate flow metering is possible in a host of line configurations, including multiple elbows in or out of plane, tee intersections, and partially closed or nominally opened valves. Installation, maintenance, and initial capital cost are easy and economical, and the resilient one-piece design ensures a long service life. Standard 316 stainless steel makes these flow conditioners suitable for all applications, including extremely corrosive environments.

Manifold Valves

Manifold-Valves

Canalta's manifold valves bring an innovative design to help maintain the integrity of the bonnet threads by segregating them from the process media. Our valves help to maintain the integrity of the bonnet threads by segregating them from the process media. The seal improves metal-to-metal, bonnet-to-bonnet contact forces while pressures increase and a dual outlet orifice to maximize fluid flow, increasing the pressure limits to 10,000 psi.

  • Patented innovative designs that enhance usability and ensure superior product integrity.
  • Engineered for maximum durability and performance, with 100% helium leak testing to ensure reliability.
  • Documented and certified testing conducted by independent testing agencies.
  • Zinc-nickel plating provides superior corrosion resistance compared to electroless nickel and cobalt plating.
  • Compliant with WEEE and RoHS standards.
applications

Areas of Applications

  • HVAC
  • OEMS/Installers
  • Hydrogen
  • Biofuels / Energy from waste
  • Utilities (Power & Water)
  • Manufacturing
  • Defense
  • Upstream, midstream and downstream
  • Nuclear

Download Brochure

Other Products
Get in Touch
Get in Touch
with Us
Want to Know More?
Send us a message and we will be happy to help you.
Top